| 10,500
lbs. - 2 speed |
|
|
70-Series
Part Number - 70-50050C
Note: Requires 34
series Valve kit to be operated from OE Power Steering Pump.
Note: The sheet metal gearbox control handles have since been upgraded
to cast parts by the factory. |
|
75 Series
Part Number - 75-50050C
Note: Requires 35
Series Vehicle Adaptor Kit to be operated from OE Power Steering
Pump.
Note: The sheet metal gearbox control handles have since been upgraded
to cast parts by the factory. |
|
$620
|
|
$785
|
|
Features
Uses remote solenoid under vehicle hood
Freespooling.
Power in/out.
Mechanical lock.
Sealed against the elements.
Can be used under water.
Corrosion resistant.
Stainless steel tie bars and
fasteners.
Reversible mounting.
Can be mounted on three different
sides.
2 year warranty on winch.
5 year warranty on hydraulic motor.
Roller fairlead.
Fits most mount bumpers.
Can use existing power steering
pump..
Draws only 2 amps.
|
|
Features
(This part number features exacly the same
winch
as the 70 series, but also includes the solenoid valve, hoses &
remote
control.)
Solenoid mounted directly to winch motor
|
Physical
Specifications
Rated Line Pull
(single line) |
10,500 lbs @ 1500 psi
(4,770 kgs) |
| Gear Train |
Planatary |
| Gear Ratio |
6:1 (low gear)
1:1 (high gear) |
| Motor |
18 C.I. Hydraulic |
| Cable |
3/8" x 100' (14,400 nominal) |
Drum Size: Diameter
Drum Size: Length |
6.4cm (2.5")
23cm (9") |
| Bolt Pattern |
10" x 4.5" (4 bolts, 3/8") |
| Total Weight |
88 lbs. |
|
|
Physical
Specifications
Rated Line Pull
(single line) |
10,500 lbs @ 1500 psi
(4,770 kgs) |
| Gear Train |
Planatary |
| Gear Ratio |
6:1 (low gear)
1:1 (high gear) |
| Motor |
18 C.I. Hydraulic |
| Cable |
3/8" x 100' (14,400 nominal) |
Drum Size: Diameter
Drum Size: Length |
6.4cm (2.5")
23cm (9") |
| Bolt Pattern |
10" x 4.5" (4 bolts, 3/8") |
| Total Weight |
97 lbs. |
| Directional Control |
12V Solenoid 3 way |
| Valve |
Integrated (maximum rated flow 3.5 g/m) draws 2 amps. |
| Control Switch |
Remote Switch, 12' lead |
| Hoses |
2 hoses (5' & 7') Steel Braided High Pressure
3,000 PSI rating.
Uses size 6 JIC swivel female on both ends. |
|
| NEW - See the 70 series printed
manual |
|
NEW - See the 75 series printed
manual |
|
Performance
Specifications
3.5 g/min @ 1500 psi
| Layer of Cable |
1 |
2 |
3 |
4 |
| Line Speed-Low Gear (ft/min) |
5.56 |
6.43 |
7.41 |
8.58 |
| Rated pull (lbs.) |
10,500 |
8,500 |
7,400 |
6,400 |
| Line Speed-High Gear (ft/min) |
31 |
36 |
42 |
48 |
| Rated Pull (lbs.) |
1,600 |
1,300 |
1,200 |
1,000 |
|
|
|