| 12,000
lbs. - 2 speed |
|
|
70-Series
Part Number - 70-52000C
Note: Requires 34
series Valve kit to be operated from OE Power Steering Pump.
Note: The sheet metal gearbox control handles have since been upgraded
to cast parts by the factory. |
|
75 Series
Part Number - 75-52000C
Note: Requires 35
Series Vehicle Adaptor Kit to be operated from OE Power Steering
Pump.
Note: The sheet metal gearbox control handles have since been upgraded
to cast parts by the factory. |
|
$760
|
|
$920
|
|
Features Uses remote solenoid under vehicle hood
Freespooling.
Power in/out.
Mechanical lock.
Sealed against the elements.
Can be used under water.
Corrosion resistant.
Stainless steel tie bars and
fasteners.
Reversible mounting.
Can be mounted on three different
sides.
Ductile iron strength.
2 year warranty on winch.
5 year warranty on hydraulic
motor.
Roller fairlead.
Fits most mount bumpers.
Can use existing power steering
pump..
Draws only 2 amps.
|
|
Features
(This part number features exacly the same
winch
as the 70 series, but also includes the solenoid valve, hoses &
remote
control.)
Solenoid mounted directly to winch
motor
|
Physical
Specifications
Rated Line Pull
(single line) |
12,000 lbs @ 1500 psi
(5,454 kgs) |
| Gear Train |
Planatary |
| Gear Ratio |
6:1 (low gear)
1:1 (high gear) |
| Motor (HD) |
18 C.I. Hydraulic |
| Cable |
3/8" x 100' (14,400 nominal) |
Drum Size: Diameter
Drum Size: Length |
6.4cm (2.5")
23cm (9") |
| Bolt Pattern |
10" x 4.5" (4 bolts, 3/8") |
| Total Weight |
100 lbs. |
|
|
Physical
Specifications
Rated Line Pull
(single line) |
12,000 lbs @ 1500 psi
(5,454 kgs) |
| Gear Train |
Planatary |
| Gear Ratio |
6:1 (low gear)
1:1 (high gear) |
| Motor (HD) |
18 C.I. Hydraulic |
| Cable |
3/8" x 100' (14,400 nominal) |
Drum Size: Diameter
Drum Size: Length |
6.4cm (2.5")
23cm (9") |
| Bolt Pattern |
10" x 4.5" (4 bolts, 3/8") |
| Total Weight |
111 lbs. |
| Directional Control |
12V Solenoid 3 way |
| Valve |
Integrated (maximum rated flow 8 g/m) draws 2 amps. |
| Control Switch |
Remote Switch, 12' lead |
| Hoses |
2 hoses (5' & 7') Steel Braided High Pressure
3,000 PSI rating.
Uses size 6 JIC swivel female on both ends. |
|
| NEW - See the 70 series printed
manual |
|
NEW - See the 75 series printed
manual |
|
Performance
Specifications
3.5 g/min @ 1500 psi
| Layer of Cable |
1 |
2 |
3 |
4 |
| Line Speed-Low Gear (ft/min) |
5.56 |
6.43 |
7.41 |
8.58 |
| Rated pull (lbs.) |
12,000 |
9,400 |
8,200 |
7,000 |
| Line Speed-High Gear (ft/min) |
31 |
36 |
42 |
48 |
| Rated Pull (lbs.) |
2,000 |
1,550 |
1,350 |
1,150 |
|
|
|