9,000
lbs. - 2 speed |
|
|
70-Series
Part Number - 70-50080C
Note: Requires34
series Valve kit to be operated from OE Power Steering
Pump.
Note: The sheet metal gearbox control handles have since been
upgraded to cast parts by the factory. |
|
75
Series
Part Number - 75-50085C
Note: Requires35
Series Vehicle Adaptor Kit to be operated from OE Power
Steering Pump.
Note: The sheet metal gearbox control handles have since been
upgraded to cast parts by the factory. |
|
|
$860
|
|
$1030
|
|
|
Features
- Uses remote solenoid under vehicle
hood
- Freespooling.
- Power in/out.
- Mechanical lock.
- Sealed against the elements.
- Can be used under water.
- Corrosion resistant.
- Stainless steel tie bars and
fasteners.
- Reversible mounting.
- Can be mounted on three different
sides.
- 2 year warranty on winch.
- 5 year warranty on hydraulic
motor.
- Roller fairlead.
- Fits most mount bumpers.
- Can use existing power steering pump.
- Draws only 2 amps.
|
|
Features
(This part number features exacly the same
winch as the 70 series, but also includes the solenoid valve,
hoses & remote control.)
- Solenoid mounted directly to winch
motor.
|
|
|
Physical Specifications
Rated Line Pull
(single line) |
9,000 lbs @ 1500 psi
(4,090 kgs) |
Gear Train |
Planatary |
Gear Ratio |
6:1 (low gear)
1:1 (high gear) |
Motor |
14 C.I. Hydraulic |
Cable |
3/8" x 100' (14,400 nominal) |
Drum Size: Diameter
Drum Size: Length |
6.4cm (2.5")
23cm (9") |
Bolt Pattern |
10" x 4.5" (4 bolts, 3/8") |
Total Weight |
88 lbs. |
|
|
Physical Specifications
Rated Line Pull
(single line) |
9,000 lbs @ 1500 psi
(4,090 kgs) |
Gear Train |
Planatary |
Gear Ratio |
6:1 (low gear)
1:1 (high gear) |
Motor |
14 C.I. Hydraulic |
Cable |
3/8" x 100' (14,400 nominal) |
Drum Size: Diameter
Drum Size: Length |
6.4cm (2.5")
23cm (9") |
Bolt Pattern |
10" x 4.5" (4 bolts, 3/8") |
Total Weight |
97 lbs. |
Directional Control |
12V Solenoid 3 way |
Valve |
Integrated (maximum rated flow 3.5 g/m) draws 2 amps. |
Control Switch |
Remote Switch, 12' lead |
Hoses |
2 hoses (5' & 7') Steel Braided High Pressure
3,000 PSI rating. Uses size 6 JIC swivel female on both
ends. |
|
|
|
NEW - See the 70 series printed manual |
|
NEW - See the 75 series printed
manual |
|
|
Performance Specifications
3.5 g/min @ 1500 psi
Layer of Cable |
1 |
2 |
3 |
4 |
Line Speed-Low Gear (ft/min) |
6.16 |
7.48 |
8.8 |
10.5 |
Rated pull (lbs.) |
9,000 |
7,300 |
6,200 |
5,400 |
Line Speed-High Gear (ft/min) |
33.6 |
38.4 |
48 |
57 |
Rated Pull (lbs.) |
1,500 |
1,200 |
1,000 |
900 |
|
|
|